About Femaru M37 pistol explained
Field dismounting of the Femaru M37 pistol - Femaru M37 in 9mm short (.38 ACP) - Femaru M37 in 7.65mm short (.32 ACP) - Removal of the magazine - Locking of the slide at the dismounting notch - Dismounting of the barrel
Field dismounting of the Femaru M37 pistol
- Femaru M37 in 9mm short (.38 ACP)
- Femaru M37 in 7.65mm short (.32 ACP)
- Removal of the magazine
- Locking of the slide at the dismounting notch
- Dismounting of the barrel
- Dismounting of the slide
Dismounting of the slide
- Dismounting of the extractor
- Dismounting of the firing pin
- Dismounting of the front sight
Dismounting of the frame (1)
- Dismounting of the holdopen latch
- Dismounting of the grip plates
- Dismounting of the lanyard ring
- Dismounting of the hammer
Dismounting of the frame (2)
- Removal of the hammer strut
- Dismounting of the magazine latch
- Dismounting of the grip safety
- Dismounting of the mainspring housing
- Reassembly tip
Dismounting of the frame (3)
- Dismounting of the sear
- Dismounting of the trigger bar
- Dismounting of the trigger
Dismounting of the frame (4)
- Dismounting of the disconnector and ejector
- Disassembly of the magazine
- Index of the parts (both models)
Functioning of the Femaru M37 (1)
- Chambering of a cartridge
- Inspection of the magazine lips
- Cartridge pushed against the feed ramp
- Cartridge rim engaged by the extractor claw
- Cocking of the hammer
Functioning of the Femaru M37 (2)
- Functioning of the trigger mechanism
- Camming action of the sear pivot pin
- Trigger bar deflected downwards
- Disconnection of the trigger bar
Functioning of the Femaru M37 (3)
- The grip safety explained
- Manual safety of the .32 ACP model
Functioning of the Femaru M37 (4)
- Firing cycle (explosion)
- Percussion of the cartridge primer
- Early stage of the slide recoil
- Extraction and ejection
- Slide retained by the holdopen latch
Reassembly of the frame
- Re-installation of the disconnector, ejector, and trigger
- Re-installation of the trigger bar
- Re-installation of the sear
- Re-installation of the mainspring housing
- Re-installation of the grip safety and lanyard ring
- Re-installation of the hammer and strut
The origins of the Femaru M37 pistol
- Rudolf Frommer (1868-1936)
- Frommer pistol model 1901
- Frommer pistol model 1906
- Frommer pistol model 1910
- Frommer STOP
- Frommer BABY (.32 ACP)
- Frommer LILIPUT (.25 ACP)
Evolution and production of the Femaru M37
- Frommer Model 29 pistol
- Femaru Model 37 pistol in .380 ACP
- Serial number ranges
- The C-prefix variation of the model 37M.
- Usual markings found on the .380 caliber version
- Femaru Model 37 pistol in .32 ACP
- First to fifth variants
- German markings
Previous Versions
Here you can find the changelog of Femaru M37 pistol explained since it was posted on our website on 2020-09-04 11:00:39.
The latest version is 26 and it was updated on 2024-04-22 17:40:02. See below the changes in each version.
Femaru M37 pistol explained version Android AP26 - 2018
Updated At: 2018-09-18
Changes: If you encounter problems with the images not showing off, go to the Parameters of your device and select "APPs". You will find there, the list of all the APPs available in your phone.
Click on the APP concerned by the problem, and, in the "storage" section, suppress data and cache.Then, come back to the APP parameters and select the "Permission" section ("no permission allowed" should be mentioned). In that section activate the "Storage" option. Run your APP again.
